toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Interior - Wind Noise/Whistle|Page 2946 > < Brake Light Switch|Service and Repair
Page 1
background image

Clearance Lamp: Customer Interest
Interior - Wind Noise/Whistle

REFERENCEBODY
NUMBER - 1 3
DATE

8-8-84

MODEL

SV12, SVI6, CVI2

CONDITION:

A wind noise/whistle is audible in the passenger compartment on certain 1983/84 Camrys at highway speeds.

Whistle

POSSIBLE CAUSE:

Due to vehicle assembly tolerances, air can flow between the headlamp doors and clearance lamp assemblies and resonate through the fender cavity
(Figure 1).

Headlamp Door

REMEDY:

(1)

Remove the clearance lamp assembly.

(2)

Cut a 135 mm (5.25 in.) long strip of 19 mm (.75 in.) wide 3M Black Vinyl Foam Tape # 6370 or equivalent.

(3)

Apply the foam tape to the headlamp door surface which mates to the clearance lamp assembly (Figure 2). The tape should be installed so its edge

Interior - Wind Noise/Whistle|Page 2946 > < Brake Light Switch|Service and Repair