Camry L4-1995cc 2.0L SOHC (2S-E) (1984)
/Page-433005.png)
REPLACEMENT NOT REQUIRED
III. IGNITER IDENTIFICATION MARKS
Location of igniter and identification marks:
IV. Igniter Replacement Procedure and Completion Label
Removal of Igniter
Removal of Igniter
1.
Remove rotor, ignition coil cover and igniter cover.
2.
Disconnect the red and brown wires from the (+) ignition coil terminal.
3.
Disconnect the yellow and blue wires from the (-) ignition coil terminal.
4.
Disconnect the pink, white and black wires from the igniter unit.
