Camry L4-2.4L (2AZ-FE) (2005)
1.
From the underside of the package tray, drill out the old speaker grille.
Use an 8 mm (5/16 inch) drill bit, to drill out the heat-staked speaker grille at the five locations.
2.
Install the NEW speaker grille and fasten in place using the push lock nuts provided in the repair kit.
HINT:
Use a small deep socket to push the nuts firmly in place.
NOTE:
Make sure that there are NO gaps between the speaker grille and package tray.
3.
Reassemble in reverse order of disassembly.