Camry L4-2.4L (2AZ-FE) (2005)
b) Install the tank without damaging the O-ring.
c) Tap the lock plate with a soft-faced hammer so that there is no gap between the lock plate and the tank.
9. ASSEMBLE SST
SST 09230-01010, 09231-14010
a) Install the punch assembly to the overhaul handle, inserting it in the hole in part A as shown in the illustration.
b) While gripping the handle, adjust the stopper bolt so that dimension B is as shown in the illustration.
Dimension B: 8.4 mm (0.331 inch)
10. CAULK LOCK PLATE
a) Lightly press SST against the lock plate in the order shown in the illustration. After repeating this a few times, fully caulk the lock plate by
gripping the handle until stopped by the stopper plate.
SST 09230-01010
HINT:
^
Do not tap the areas protruding around the pipes, brackets or tank ribs.