Camry L4-2.4L (2AZ-FE) (2005)
/Page-350012.png)
NOTICE
If the cutting particles that are produced during the drilling and tapping process enter the engine, they can cause engine damage, so be sure to
apply protection.
Use tape or a shop cloth to cover the parts shown and protect the cylinder block so that cutting particles do NOT enter it.
^
Drill fixture bolt holes
^
Top surface of the cylinder block
^
Cylinder block component installation holes
Use a new shop cloth and tape for each repair as the old ones may have cutting particles attached to them.
9. Repair the bolt hole.
A. Tilt the cylinder block so that the cutting particles will fall downwards.
B. Use the core drill and repair the bolt hole.
