Camry L4-2.4L (2AZ-FE) (2005)
Key Reminder Switch: Component Tests and General Diagnostics
Component Inspection
INSPECTION
1. INSPECT UN-LOCK WARNING SWITCH ASSEMBLY
a. Check the switch continuity.
If the continuity is not as specified, replace the switch.
2. INSPECT FRONT DOOR COURTESY LAMP SWITCH
a. Check the switch continuity.
If the continuity is not as specified, replace the switch.
Inspections
ON-VEHICLE INSPECTION
1. FUNCTION CHECK
a. Check that the key reminder warning buzzer will sound.
1. With the driver's door close, insert the key into the ignition switch lock cylinder, and then turn the key to the LOCK or ACC.
2. Then, check that the buzzer will sound intermittently if the driver's door is opened.
b. Check that the key reminder warning buzzer will stop.
1. Check that the buzzer will stop if any of the following operations is done while the buzzer is sounding.
- Close the driver's door (front door courtesy lamp switch assembly is off).
- Turn the ignition switch ON.
- Pull out the key from the ignition switch lock cylinder.
2. INSPECT INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY (BODY ECU) (LEFT SIDE)
a. Disconnect the B6 body ECU connector.