toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Instruments - Inaccurate Coolant Temperature Gauge|Page 6648 > < Instruments - Inaccurate Coolant Temperature Gauge|Page 6642
Page 1
background image

Temperature Gauge: Customer Interest
Instruments - Inaccurate Coolant Temperature Gauge

ELECTRICAL
EL005-06
REVISED

Title:
ENGINE TEMPERATURE
GAUGE INACCURATE

Models:
'05 - '06 Camry

May 1, 2006

TSB REVISION NOTICE:

^

January 25, 2008: The OFP in the Warranty Information table has been updated.

^

May 19, 2006: The previous and current part numbers in the Parts Information table have been updated.

Previous versions of this TSB should be discarded.

Introduction
Some customers with 2005 - 2006 model year Camry vehicles may encounter a condition where the engine temperature gauge needle points to "H" with
the engine at normal operating temperature. An updated combination meter has been developed to address this condition.

HINT:
This condition is difficult to reproduce and will ONLY occur immediately after a hot restart.

NOTE:

The combination meter contains the vehicle odometer memory. This component needs to be ordered directly from the vendor (Denso) with the
correct mileage programmed. Refer to the Technical Information System (TIS), Warranty Policy/Procedure Manual: HANDBOOK: Policy 4.24:
Digital Odometer Replacement Program.

Applicable Vehicles

^

2005 - 2006 model year Camry vehicles.

Parts Information

Warranty Information

Applicable Warranty*
This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from
the vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customers specific complaint.

Instruments - Inaccurate Coolant Temperature Gauge|Page 6648 > < Instruments - Inaccurate Coolant Temperature Gauge|Page 6642