Camry L4-2.4L (2AZ-FE) (2005)
/Page-1473001.png)
Headlamp Dimmer Switch: Testing and Inspection
HEADLAMP DIMMER SWITCH ASSEMBLY
a. Inspect light control switch continuity.
1. Check that there is continuity between terminals at each switch position as shown in the chart.
b. Inspect headlamp dimmer switch continuity.
1. Check that there is continuity between terminals at each switch position as shown in the chart.
c. Inspect turn signal switch continuity.
1. Check that there is continuity between terminals at each switch position as shown in the chart.
d. Inspect front fog light switch continuity.
1. Check that there is continuity between terminals at each switch position as shown in the chart.
