toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Fuel System - MIL ON/DTC's P2103/P2111/P2112 Stored|Page 2986 > < Fuel System - MIL ON/DTC's P2103/P2111/P2112 Stored
Page 2
background image

NOTE

When these DTCs are stored, the Engine Control Module/ECM (SAE term: Powertrain Control Module/PCM) enters LIMP MODE or FAIL SAFE
where the ECM cuts off current to the throttle control motor. The throttle control valve returns to a predetermined opening angle (approximately 16
degrees) by the force of the return spring. The ECM then adjusts the engine output by controlling the fuel injection (intermittent fuel-cut) and ignition
timing in accordance with the accelerator pedal opening angle to enable the vehicle to continue at a minimal speed. If the accelerator pedal is
depressed firmly and slowly, the vehicle can be driven slowly.

Production Change Information

This TSB applies to vehicles produced BEFORE the Production Change Effective VINs shown.

Parts Information

Warranty Information

APPLICABLE WARRANTY

^ This repair is covered under the Toyota Federal Emissions Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first,

from the vehicle's in-service date.

Fuel System - MIL ON/DTC's P2103/P2111/P2112 Stored|Page 2986 > < Fuel System - MIL ON/DTC's P2103/P2111/P2112 Stored