Camry L4-2.4L (2AZ-FE) (2005)
Knock Sensor: Service and Repair
REPLACEMENT (From July 2003)
1. DRAIN ENGINE COOLANT
2. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE
3. REMOVE THROTTLE BODY ASSEMBLY
4. REMOVE INTAKE MANIFOLD
a. Remove the 5 bolts, 2 nuts, intake manifold and gasket.
5. REMOVE KNOCK SENSOR
a. Disconnect the knock sensor connector.
b. Remove the nut and knock sensor.
6. INSTALL KNOCK SENSOR
a. Install the knock sensor with the nut.
Torque: 20 N.m (204 kgf.cm, 15 ft.lbf)
b. Connect the knock sensor connector.