Camry L4-2.4L (2AZ-FE) (2005)
/Page-1160001.png)
Malfunction Lamp / Indicator: Symptom Related Diagnostic Procedures
SRS Warning Light Circuit Malfunction (Always Light Up, When DTC Is Not Output)
SRS WARNING LIGHT CIRCUIT MALFUNCTION (ALWAYS LIGHT UP, WHEN DTC IS NOT OUTPUT)
CIRCUIT DESCRIPTION
The SRS warning light is located on the combination meter assembly.
When the SRS is normal, the SRS warning light comes on for approximately 6 seconds after the ignition switch is turned from the LOCK to ON
position, and then goes off automatically.
If there is a malfunction in the SRS, the SRS warning light comes on to inform the driver of a problem.
When terminals TC and CG of the DLC3 are connected, the DTC is displayed by blinking the SRS warning light.
