Camry L4-2.4L (2AZ-FE) (2005)
/Page-932002.png)
f.
Turn SST (1-B) and remove SST (1-A, B).
g. Remove the pulley nut and generator pulley.
2. REMOVE GENERATOR REAR END COVER
a. Place the generator on the generator pulley.
b. Remove the 3 nuts and the generator rear end cover.
3. REMOVE TERMINAL INSULATOR
a. Remove the terminal insulator from the generator rectifier end frame.
4. REMOVE GENERATOR BRUSH HOLDER ASSEMBLY
a. Remove the 2 screws and the generator brush holder.