Camry L4-2.4L (2AZ-FE) (2005)
a. Remove the bolt, nut and disconnect the parking brake cable.
b. Remove the bolt, nut and disconnect the strut rod (front side).
HINT: Keep the nut fixed while loosening and removing the bolt.
c. Remove the bolt, nut and strut rod from rear axle carrier.
HINT: Keep the nut fixed while loosening and removing the bolt.
3. TEMPORARY TIGHTEN STRUT ROD ASSEMBLY REAR
a. Install the strut rod (rear side), bolt nut and temporarily tighten the bolt.
HINT:
-
Insert the bolt from the inner side of the vehicle and temporarily install the bolt.
-
Keep the nut fixed while tightening the bolt.