toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

A/T - U250E, Harsh 5-4 Downshifts|Page 3258 > < A/T - U250E, Harsh 5-4 Downshifts|Page 3252
Page 1
background image

Pressure Regulating Solenoid: All Technical Service Bulletins
A/T - U250E, Harsh 5-4 Downshifts

°TRANSMISSION & CLUTCH
TC013-05

September 9, 2005

Title:
HARSH 5.4 DOWNSHIFT ON DECELERATION

Models:
'05 Camry (2AZ-FE)

Introduction

Some 2005 model year Camry vehicles equipped with the 2AZ-FE engine and U250E automatic transaxle (ATM) may exhibit a harsh 5-4 downshift
under the following conditions:

^

ATM at normal operating temperature

^

After driving above 45 mph (72 km/h)

^

Decelerating through 28 mph (45 km/h)

The Line Pressure Control Solenoid Assembly (SLT) has been improved to reduce this condition on customer complaint vehicles.

Applicable Vehicles
^

2005 model year Camry vehicles equipped with the 2AZ-FE engine and 5-Speed ATM produced BEFORE the Production Change Effective VINs
shown below.

Production Change Information

Parts Information

Warranty Information

Applicable Warranty:

This repair is covered under the Toyota Powertrain Warranty. This warranty is in effect for 60 months or 60,000 miles, whichever occurs first, from the
vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.

A/T - U250E, Harsh 5-4 Downshifts|Page 3258 > < A/T - U250E, Harsh 5-4 Downshifts|Page 3252