Camry L4-2.4L (2AZ-FE) (2005)
/Page-756003.png)
c. Remove the indicator lamp cap and indicator lamp bulb from the indicator lamp wire sub-assembly.
12. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
a. Remove the 2 screws and shift lever knob from the shift lever.
b. Using a screwdriver, release the stopper of the connector.
c. Using a small screwdriver, disengage the locking lug of the terminals 3 and 7, and pull out the terminals from the rear.
13. REMOVE POSITION INDICATOR SLIDE COVER
a. Remove the position indicator slide cover from the floor shift assembly.
