Camry L4-2.4L (2AZ-FE) (2005)
/Page-756009.png)
b. Install the shift lever knob to the shift lever with 2 screws.
34. INSTALL INDICATOR LAMP WIRE SUB-ASSEMBLY
a. Install the indicator lamp bulb and indicator lamp cap to the indicator lamp wire.
b. Install the indicator lamp wire to the position indicator housing lower.
c. Install the indicator lamp wire harness and connector as shown in the illustration.
35. INSTALL FLOOR SHIFT ASSEMBLY
a. Install the floor shift assembly to the vehicle with the 4 bolts.
Torque: 12 Nm (122 kgf-cm, 9 ft. lbs.)
HINT: Tighten them in the order, A, B. C and D.
b. Connect the transmission control switch connector.
c. Connect the shift lock control computer connector.
