Camry L4-2.4L (2AZ-FE) (2005)
b) Remove the bolt and separate the speed sensor front LH from the steering knuckle.
NOTICE: Prevent foreign matter from adhering to the speed sensor.
7. SEPARATE TIE ROD END SUB-ASSEMBLY LH
a) Remove the cotter pin and nut.
b) Using SST, separate the tie rod end sub-assembly from the steering knuckle.
SST 09628-62011
8. SEPARATE FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER NO.1 LH
a) Remove the bolt and 2 nuts, and separate the front suspension arm sub-assembly lower No. 1 LH from the lower ball joint.
9. SEPARATE FRONT AXLE ASSEMBLY LH