Camry L4-2.4L (2AZ-FE) (2005)
12. FIX FRONT AXLE HUB SUB-ASSEMBLY LH
SST 09608-16042 (09608-02021, 09608-02041)
NOTICE: The hub bearing could be damaged if it is subjected to the vehicle's full weight, such as when moving the vehicle with the drive shaft
removed.
Therefore, if it is absolutely necessary to place the vehicle's weight on the hub bearing, first support it with SST.
13. INSPECT FRONT DRIVE SHAFT ASSEMBLY LH
a) Check that there is no remarkable play in the radial direction of the outboard joint.
b) Check that the inboard joint slides smoothly in the thrust direction.
c) Check that there is no remarkable play in the radial direction of the inboard joint.
d) Check the boots for damage.
14. REMOVE FRONT AXLE INBOARD JOINT BOOT LH NO.2 CLAMP