Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
^
Disc brake grease can come out slightly from the area where the anti-squeal shim is installed.
^
Make sure that disc brake grease is NOT applied onto the lining surface.
b.
Install the 2 anti-squeal shims and the 2 pad wear indicators to each pad.
NOTE:
Install the pad wear indicators in the correct positions and directions.
I.
Install the 2 front brake pads with anti-squeal shims to the disc brake cylinder mounting.
Apply a small amount of the disc brake grease (1 - 2 mm [0.04 - 0.08 in.] thick) to the areas shown in the illustration.
NOTE:
Do NOT apply grease to the friction surfaces of the brake pads or the disc rotor.
J.
Install the 2 anti-squeal springs, if equipped.
K.
Install the disc brake cylinder assembly with the 2 bolts.
Torque: 34 N.m (350 kgf.cm, 25 ft.lbf)
L.
Install the front wheel.
Torque: 103 N.m (1,050 kgf.cm, 76 ft.lbf)
3.
Road test the vehicle to confirm the front brake "squeak" noise is NO longer present.