Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
c.
Apply a small amount of the disc brake grease (1 - 2 mm [0.04 - 0.08 in.] thick) to the areas shown in the illustration.
NOTE:
Do NOT apply grease to the friction surfaces of the brake pads or the disc rotor.
J.
Install the 2 rear disc brake pads with anti-squeal shim kit.
K.
Install the rear disc brake caliper assembly with the 2 bolts.
Torque: 2 N.m (630 kgf.cm, 46 ft.lbf)
L.
Install the rear wheel.
Torque: 103 N.m (1,050 kgf.cm, 76 ft.lbf)
M.
Road test the vehicle to confirm the rear brake squeak noise is NO longer present.