Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-2899003.png)
Use the same procedures for the RH side and LH side.
C. Remove the 8 screws 2 clips 2 radiator grille protectors and bolt.
D. Disengage the 2 claws and disconnect the front bumper assembly as shown in the illustration.
Use the same procedures for the RH side and LH side.
E. Without fog lights:
Remove the front bumper assembly.
For vehicles with fog lights:
Disconnect each connector, and then remove the front bumper assembly.
3. Remove RH headlight assembly.
