Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
Trunk / Liftgate Spring: Service and Repair
Installation
From 03-2006 to 10-2006
ENGINE HOOD / DOOR: LUGGAGE DOOR HINGE TORSION BAR: INSTALLATION
INSTALLATION
HINT: After installing the torsion bar, use your hand to open and close the luggage door. Make sure the luggage door can open and close
smoothly.
1. INSTALL LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT
(a) Install the luggage compartment door torsion bar support as shown in the illustration.
2. INSTALL LUGGAGE DOOR HINGE TORSION BAR LH
(a) Set the tip of the luggage door hinge torsion bar LH in the center installation hole. The upper and lower installation holes are used for
adjustment.
(b) Connect the luggage door hinge torsion bar LH to the right side of the vehicle body as shown in the illustration.
(c) Connect the luggage door hinge torsion bar LH to the luggage compartment door torsion bar support as shown in the illustration.