Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
(b) Disconnect the connectors and remove the roof console box assembly.
48. REMOVE VISOR ASSEMBLY LH
(a) Using a moulding remover, disengage the 4 claws and remove the visor bracket cover.
(b) Disengage the 2 clips and remove the visor assembly LH.
49. REMOVE VISOR ASSEMBLY RH
HINT: Use the same procedure for the RH side and the LH side.
50. REMOVE VISOR HOLDER
(a) Turn the visor holder approximately 45° and pull it out as shown in the illustration.
(b) Disengage the 2 claws and remove the visor holder.
HINT: Use the same procedure for the RH side and the LH side.
51. REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY
(a) Using a screwdriver, disengage the 6 claws and remove the 2 assist grip covers.
HINT: Tape the screwdriver tip before use.