Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-2967042.png)
(b) Disengage the 2 clips and remove the front assist grip sub-assembly.
HINT: Use the same procedure for the RH side and the LH side.
52. REMOVE REAR ASSIST GRIP SUB-ASSEMBLY
HINT: Use the same procedure for the rear side and the front side.
53. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (w/o Sliding Roof)
(a) Using a screwdriver, disengage the 4 claws and remove the lens cover.
HINT: Tape the screwdriver tip before use.
(b) Using a screwdriver, disengage the 2 claws [A] as shown in the illustration.
HINT: Tape the screwdriver tip before use.
(c) Disengage the 2 claws [B] and remove the No. 1 room light assembly.
(d) Disconnect the room light connector.
54. REMOVE SPOT LIGHT ASSEMBLY (w/ Sliding Roof)
