Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-2967044.png)
(f) Remove the roof headlining assembly from the vehicle through the rear left door.
57. REMOVE ROOF HEADLINING ASSEMBLY (w/ Sliding Roof)
(a) Disconnect the No. 1 roof wire connector and disengage each clamp from the front pillar LH.
(b) Remove the bolt and disconnect the radio setting condenser from the front pillar RH.
(c) Disconnect the antenna cord sub-assembly connector and disengage each clamp from the front pillar RH.
(d) Disconnect the antenna cord sub-assembly connector and disengage the clamp from the rear pillar RH.
(e) Disconnect the sliding roof drive gear connector.
(f) Disengage the hook, 4 clips, and 2 fasteners.
