Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-2967048.png)
From 03-2006 to 10-2006
INTERIOR: ROOF HEADLINING: INSTALLATION
INSTALLATION
1. INSTALL NO. 1 ROOF WIRE (w/o Sliding Roof)
(a) Apply new double-sided tape to locations shown in the illustration while aligning the tape with the markings on the roof headlining.
NOTICE: Securely apply the double-sided tape to prevent it from being out of alignment and peeling off.
(b) Peel off the release paper from the double-sided tape.
(c) Attach the No. 1 roof wire along the double-sided tape so that the marking surface of the wire harness faces downward.
NOTICE:
-
Securely attach the No. 1 roof wire.
-
Failure to do so may cause abnormal noise.
(d) Apply adhesive tape to locations shown in the illustration.
