Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
33. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH
a. Remove the bolt and disconnect the floor end of the front seat outer belt assembly LH.
34. REMOVE LOWER CENTER PILLAR GARNISH LH
a. Disengage the 2 claws and 2 clips, and remove the lower center pillar garnish LH.
35. REMOVE UPPER CENTER PILLAR GARNISH LH
a. Remove the bolt.
b. Disengage the clip and remove the upper center pillar garnish LH.
36. REMOVE FRONT DOOR SCUFF PLATE RH
HINT: Use the same procedure for the RH side and the LH side.
37. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
HINT: Use the same procedure for the RH side and the LH side.
38. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
39. REMOVE LAP BELT OUTER ANCHOR COVER (for RH Side)
HINT: Use the same procedure for the RH side and the LH side.
40. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH
HINT: Use the same procedure for the RH side and the LH side.
41. REMOVE LOWER CENTER PILLAR GARNISH RH
HINT: Use the same procedure for the RH side and the LH side.
42. REMOVE UPPER CENTER PILLAR GARNISH RH
HINT: Use the same procedure for the RH side and the LH side.