Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-2969010.png)
a. Pull the roof headlining assembly into the vehicle through the rear left door.
b. Engage the 4 clips.
c. Connect the antenna cord sub-assembly connector and engage the clamp to the rear pillar RH.
d. Connect the antenna cord sub-assembly connector and engage each clamp to the front pillar RH.
e. Install the radio setting condenser to the front pillar RH with the bolt.
f.
Connect the No. 1 roof wire connector and engage each clamp to the front pillar LH.
18. INSTALL ROOF HEADLINING ASSEMBLY (w/ Sliding Roof)
