Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-3084004.png)
5. INSTALL FRONT SEAT ASSEMBLY See: Service and Repair/Removal and Replacement/Front Seat Assembly (for Power Seat)/Installation
6. INSTALL INNER SEAT TRACK BRACKET COVER See: Service and Repair/Removal and Replacement/Front Seat Assembly (for Power
Seat)/Installation
7. INSTALL SEAT TRACK COVER See: Service and Repair/Removal and Replacement/Front Seat Assembly (for Power Seat)/Installation
8. PERFORM INITIALIZATION
NOTICE: Some systems need initialization after reconnecting the cable to the negative battery terminal See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization
9. PERFORM ZERO POINT CALIBRATION CALIBRATION AND SENSITIVITY CHECK (for Front Passenger Seat) See: Restraint
Systems/Testing and Inspection/Programming and Relearning
10. INSPECT SRS WARNING LIGHT
Inspect the SRS warning light. See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Airbag
System/Diagnosis System
11. INSPECT FRONT SEAT ASSEMBLY See: Service and Repair/Removal and Replacement/Front Seat Assembly (for Power Seat)/Installation
From 10-2006
SEAT: POWER SEAT SWITCH: INSTALLATION
INSTALLATION
1. INSTALL POWER SEAT SWITCH
(a) Install the power seat switch with the 3 screws.
(b) Connect the connector.
2. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY
3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
4. INSTALL RECLINING POWER SEAT SWITCH KNOB
5. INSTALL FRONT SEAT ASSEMBLY See: Service and Repair/Removal and Replacement/Front Seat Assembly (for Power Seat)/Installation
6. INSTALL INNER SEAT TRACK BRACKET COVER See: Service and Repair/Removal and Replacement/Front Seat Assembly (for Power
Seat)/Installation
7. INSTALL SEAT TRACK COVER See: Service and Repair/Removal and Replacement/Front Seat Assembly (for Power Seat)/Installation
8. PERFORM INITIALIZATION
NOTICE: Some systems need initialization after reconnecting the cable to the negative battery terminal See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization
9. PERFORM ZERO POINT CALIBRATION CALIBRATION AND SENSITIVITY CHECK (for Front Passenger Seat) See: Restraint
Systems/Testing and Inspection/Programming and Relearning
10. INSPECT SRS WARNING LIGHT
Inspect the SRS warning light. See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Airbag
System/Diagnosis System
11. INSPECT FRONT SEAT ASSEMBLY See: Service and Repair/Removal and Replacement/Front Seat Assembly (for Power Seat)/Installation
