Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
8. Remove the RH front fender by removing the 7 bolts.
9. Inspect and repair inner fender to cowl welds.
A. Remove sealant from welds in the locations indicated in Figure 25.
B. Inspect for incomplete or separated welds.
C. If welds are found to be incomplete or separated repair by MIG welding.
D. Apply rust prevention material such as TPX Spot Prime (or equivalent) to any repaired surfaces.
E. Apply sound dampening material such as Damp Coat AD41 0 (or equivalent) over unsealed welds.
F. Repaint area to match vehicle exterior color.
10. Inspect and adjust inner fender to cowl gap.