Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
(f) Remove the 3 nuts and brake actuator with No. 1 brake actuator bracket.
NOTICE: Do not damage the brake lines.
7. REMOVE BRAKE ACTUATOR BRACKET ASSEMBLY
(a) Remove the 3 bolts and brake actuator bracket assembly.
From 10-2006
BRAKE CONTROL: BRAKE ACTUATOR: REMOVAL
REMOVAL
NOTICE: If brake fluid spills on any painted surface, wash or otherwise remove it completely.
1. PERFORM ACCUMULATOR PRESSURE ZERO DOWN See: Brake Bleeding/Service and Repair/Brake Fluid
2. DISCONNECT CABLE FROM BATTERY NEGATIVE TERMINAL
3. REMOVE ABS MOTOR RELAY
(a) In order to prohibit brake control, remove the 2 ABS motor relays with the power switch off.
NOTICE: If the pump motor operates while air remains inside the brake actuator hose, the air will enter the actuator, resulting in difficulty in
bleeding the brakes.
4. REMOVE RADIATOR RESERVE TANK ASSEMBLY