Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-1870012.png)
Inspection/Programming and Relearning/Repair Instruction - Initialization
From 10-2006
BRAKE CONTROL: BRAKE ACTUATOR: INSTALLATION
INSTALLATION
1. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY
(a) Install the brake actuator bracket assembly with the 3 bolts.
Torque: 19 Nm (194 kgf-cm, 14ft-lbf)
2. INSTALL BRAKE ACTUATOR WITH NO. 1 BRAKE ACTUATOR BRACKET
(a) Install the brake actuator with No. 1 brake actuator bracket to the body with the 3 nuts.
Torque: 19 Nm (194 kgf-cm, 14ft-lbf)
NOTICE: Do not damage the brake lines.
(b) Connect the brake actuator connector.
(c) Lock the lock lever.
