Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
NOTICE: When reconnecting the cable to the negative battery terminal after installing the steering sensor, check that the front tires and
steering wheel are kept aligned straight ahead before and after connecting the cable to the negative battery terminal.
4. REMOVE NO. 2 LOWER STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Steering Pad/Removal
5. REMOVE NO. 3 LOWER STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Steering Pad/Removal
6. REMOVE STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Steering
Pad/Removal
7. REMOVE STEERING WHEEL ASSEMBLY See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Removal
8. REMOVE STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Removal
9. REMOVE SPIRAL CABLE SUB-ASSEMBLY WITH STEERING ANGLE SENSOR See: Restraint Systems/Air Bag Systems/Clockspring
Assembly / Spiral Cable/Service and Repair/Removal
10. REMOVE STEERING ANGLE SENSOR
(a) Disengage the 6 claws and remove the steering angle sensor from the spiral cable.