Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-1891002.png)
b. Remove the 2 nuts and skid control ECU.
INSTALLATION
1. INSTALL SKID CONTROL ECU
a. Install the skid control ECU with the 2 nuts.
Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)
b. Connect the 4 skid control ECU connectors.
2. INSTALL WIRING HARNESS CLAMP BRACKET
