Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-1960001.png)
Hydraulic Control Assembly - Antilock Brakes: Overhaul
Disassembly
BRAKE CONTROL: BRAKE ACTUATOR: DISASSEMBLY
DISASSEMBLY
1. REMOVE NO. 1 BRAKE ACTUATOR BRACKET
(a) Remove the 2 nuts and brake actuator assembly from the No. 1 brake actuator bracket.
Reassembly
BRAKE CONTROL: BRAKE ACTUATOR: REASSEMBLY
REASSEMBLY
1. INSTALL NO. 1 BRAKE ACTUATOR BRACKET
(a) Install the brake actuator assembly to the No. 1 brake actuator bracket with the 2 nuts.
Torque: 8.0 Nm (82 kgf-cm, 71in-lbf)
NOTICE: Do not remove the hole plug before connecting the brake line because a new brake actuator assembly is filled with brake fluid.
