Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-1966025.png)
PARKING BRAKE: PARKING BRAKE PEDAL (for TMMK Made): INSTALLATION
INSTALLATION
1. INSTALL PARKING BRAKE PEDAL ASSEMBLY
(a) Install the parking brake pedal assembly with the bolt and 2 nuts.
Torque: 39 Nm (398 kgf-cm, 29ft-lbf)
(b) Connect the parking brake switch connector.
(c) Install the No. 1 parking brake cable assembly to the body with the bolt, the nut, and a new No. 1 parking brake cable clamp.
Bolt - Torque: 15 Nm (153 kgf-cm, 11ft-lbf)
Nut - Torque: 5.4 Nm (55 kgf-cm, 48in-lbf)
(d) Using a brass bar and a hammer, install the clip to the No. 1 parking brake cable assembly.
2. CONNECT NO. 4 PARKING BRAKE CABLE ASSEMBLY
