Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
(c) Temporarily tighten the the lock nut and No. 1 wire adjusting nut.
NOTICE: Fully tighten the lock nut and the No. 1 wire adjusting nut when adjusting the parking brake pedal travel.
Torque: 5.4 Nm (55 kgf-cm, 48in-lbf)
(d) Bend the parking brake pedal claw.
Disassembly
PARKING BRAKE: PARKING BRAKE PEDAL (for TMC Made): DISASSEMBLY
DISASSEMBLY
1. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY
(a) Using a screwdriver, pull up the parking brake pedal claw.
(b) Remove the lock nut and the No. 1 wire adjusting nut.