Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-1992001.png)
Acceleration/Deceleration Sensor: Testing and Inspection
Yaw Rate and Acceleration Sensor (for TMMK Made)
BRAKE CONTROL: YAW RATE AND ACCELERATION SENSOR (for TMMK Made): INSPECTION
INSPECTION
1. INSPECT YAW RATE AND ACCELERATION SENSOR
(a) Inspect the yaw rate and acceleration sensor. If any of the following occurs, replace the yaw rate and acceleration sensor with a new one:
-
The surface of the yaw rate and acceleration sensor is cracked, dented, or chipped off.
-
The connector is scratched, cracked, or damaged.
-
The yaw rate and acceleration sensor has been dropped.
