Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
Braking Sensor/Switch: Service and Repair
Removal
From 03-2006 to 10-2006
BRAKE CONTROL: BRAKE PEDAL STROKE SENSOR: REMOVAL
REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof
Headlining/Removal
2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof
Headlining/Removal
3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (From 03-2006 to 10-2006)/Removal
4. REMOVE BRAKE PEDAL STROKE SENSOR
(a) Disconnect the brake pedal stroke sensor connector.
(b) Remove the 2 bolts and the brake pedal stroke sensor.
From 10-2006
BRAKE CONTROL: BRAKE PEDAL STROKE SENSOR: REMOVAL
REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof
Headlining/Removal
2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof
Headlining/Removal
3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH (for TMC Made) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (for TMC Made)(From 10-2006)/Removal
4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH (for TMMK Made) See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (for TMMK Made)(From 10-2006)/Removal
5. REMOVE BRAKE PEDAL STROKE SENSOR