Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-2027001.png)
Wheel Speed Sensor: Testing and Inspection
Front Speed Sensor
BRAKE CONTROL: FRONT SPEED SENSOR: INSPECTION
INSPECTION
1. INSPECT FRONT SPEED SENSOR
(a) Inspect the front speed sensor. If any of the following occurs, replace the front speed sensor with a new one:
-
The surface of the front speed sensor is cracked, dented, or chipped off.
-
The connector or wire harness is scratched, cracked, or damaged.
-
The front speed sensor has been dropped.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
If the value is not as specified, replace the front speed sensor.
