Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Installation
From 03-2006 to 10-2006
2AZ-FXE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION
INSTALLATION
1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
(a) Install a new gasket onto the engine coolant temperature sensor.
(b) Using SST, install the engine coolant temperature sensor.
SST: 09817-33190
Torque: 20 Nm (204 kgf-cm, 15ft-lbf)
(c) Connect the engine coolant temperature sensor connector.
2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY See: Engine/Service and Repair/Removal and Replacement/Installation
3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
4. INSTALL AIR CLEANER INLET ASSEMBLY See: Engine/Service and Repair/Removal and Replacement/Installation
5. ADD COOLANT (for Engine) See: Coolant/Testing and Inspection/Coolant (for Engine)
6. INSPECT FOR COOLANT LEAK (for Engine) See: Testing and Inspection/Cooling System
7. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY See: Engine/Service and Repair/Removal and Replacement/Installation
From 10-2006
2AZ-FXE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION
INSTALLATION
1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
(a) Install a new gasket onto the engine coolant temperature sensor.
(b) Using SST, install the engine coolant temperature sensor.
SST: 09817-33190
Torque: 20 Nm (204 kgf-cm, 15ft-lbf)