Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
3. REMOVE FLYWHEEL SUB-ASSEMBLY
(a) Using SST, hold the crankshaft.
SST: 09213-54015
91651-60855
SST: 09330-00021
(b) Remove the 8 bolts and flywheel.
4. REMOVE ENGINE REAR OIL SEAL
(a) Using a knife, cut through the oil seal lip.
(b) Using a screwdriver with its tip taped, pry out the oil seal.
NOTICE: After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.