Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-2516003.png)
(a) Remove the bolt and disconnect the liquid tube sub-assembly from the condenser.
(b) Remove the O-ring from the liquid tube sub-assembly.
NOTICE: Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
9. DISCONNECT COOLER REFRIGERANT DISCHARGE PIPE
(a) Remove the bolt and disconnect the cooler refrigerant discharge pipe from the condenser.
(b) Remove the O-ring from the cooler refrigerant discharge pipe.
NOTICE: Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
10. REMOVE COOLER CONDENSER ASSEMBLY
(a) Remove the 2 bolts and condenser.
11. REMOVE COOLER DRYER
