Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-2527017.png)
(c) Disengage the 4 claws and remove the ornament.
2. REMOVE CONTROL KNOB SUB-ASSEMBLY
NOTICE: When disassembling the air conditioning control assembly, eliminate static electricity by touching the vehicle body to prevent the
components from being damaged.
(a) Disengage the 4 claws and remove the control panel case.
(b) Remove the 5 screws and switch control sub-assembly.
(c) Driver Side:
(1) Disengage the 3 claws and pull the control knob sub-assembly to the position shown in the illustration.
