Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-2546064.png)
REASSEMBLY
1. INSTALL NO. 1 COOLER THERMISTOR
(a) If using a new evaporator:
(1) Install the No. 1 cooler thermistor to the evaporator as shown in the illustration.
(b) If reusing the evaporator:
(1) Install the No. 1 cooler thermistor to the evaporator as shown in the illustration.
2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
(a) Sufficiently apply compressor oil to 2 new O-rings and the fitting surfaces. Install the 2 O-rings to the No. 1 cooler evaporator sub-assembly.
Compressor oil:
ND-OIL 11 or equivalent
(b) Install the No. 1 cooler evaporator sub-assembly.
