Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-1012001.png)
Drive Motor Circuit Breaker Sensor: Service and Repair
Installation
From 03-2006 to 10-2006
P311 HYBRID VEHICLE CONTROL: FRONT CIRCUIT BREAKER SENSOR: INSTALLATION
INSTALLATION
1. INSTALL NO. 1 CIRCUIT BREAKER SENSOR
(a) Install the No. 1 circuit breaker sensor to the inverter with converter with the 2 bolts.
Torque: 8.5 Nm (87 kgf-cm, 75in-lbf)
2. INSTALL INVERTER WITH CONVERTER See: Voltage Inverter/Service and Repair/Inverter With Converter/Installation
From 10-2006
P311 HYBRID VEHICLE CONTROL: FRONT CIRCUIT BREAKER SENSOR: INSTALLATION
INSTALLATION
1. INSTALL NO. 1 CIRCUIT BREAKER SENSOR
(a) Install the No. 1 circuit breaker sensor to the inverter with converter with the 2 bolts.
Torque: 8.5 Nm (87 kgf-cm, 75in-lbf)
2. INSTALL INVERTER WITH CONVERTER See: Voltage Inverter/Service and Repair/Inverter With Converter/Installation
