Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-1034004.png)
(a) Remove the nut and filter noise capacitor.
CAUTION: Wear insulated gloves.
24. REMOVE HV RELAY ASSEMBLY
(a) Remove the nut and disconnect the ground cable.
CAUTION: Wear insulated gloves.
(b) Disconnect the 7 connectors from the HV relay assembly.
CAUTION: Wear insulated gloves.
(c) Remove the wire harness clamp.
CAUTION: Wear insulated gloves.
(d) Remove the 2 bolts and HV relay assembly.
CAUTION: Wear insulated gloves.
25. REMOVE HIGH VOLTAGE FUSE
(a) Remove the 2 bolts and high voltage fuse.
From 10-2006
