Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
(a) Connect the 2 wire harness clamps.
CAUTION: Wear insulated gloves.
(b) Install the wire harness clamp bracket with the interlock button.
CAUTION: Wear insulated gloves.
(c) Press the interlock button.
CAUTION: Wear insulated gloves.
(d) Secure the wire harness clamp bracket with the bolt and nut.
Torque: 8.0 Nm (82 kgf-cm, 71in-lbf)
CAUTION: Wear insulated gloves.
9. INSTALL NO. 5 HV BATTERY INTAKE DUCT
(a) Install the No. 5 HV battery intake duct with the clamp.
CAUTION: Wear insulated gloves.
10. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER
(a) Install the front luggage compartment trim cover with the 3 clips.
11. INSTALL SEPARATE TYPE REAR SEATBACK ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly/Installation
12. INSTALL SEPARATE TYPE REAR SEATBACK ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly/Installation
13. INSTALL REAR SEAT CUSHION ASSEMBLY See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat