Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
(a) Install the inverter with converter assembly with 3 bolts.
Torque: 12 Nm (122 kgf-cm, 9ft-lbf)
CAUTION: Wear insulating gloves.
-
Do not hold the inverter with converter assembly by the connector terminals when removing or installing it from the vehicle.
-
Do not hit the No. 1 circuit breaker sensor against the vehicle body or other objects when removing or installing it.
(b) Install the No. 6 inverter bracket with the 2 bolts.
Torque: 10 Nm (102 kgf-cm, 7ft-lbf)
CAUTION: Wear insulating gloves.
(c) Connect the inverter with converter assembly connectors and lock the connector with the lock lever.
NOTICE:
-
The lever is securely engaged.
-
The connector does not come out when its body is pulled.
(d) Connect the 2 wire harness clamps.
(e) Connect the circuit breaker sensor connector.
3. CONNECT FRAME WIRE