Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
Tire Pressure Module: Service and Repair
Removal
From 03-2006 to 10-2006
TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: REMOVAL
REMOVAL
NOTICE: Before removing the tire pressure warning ECU, read the registered transmitter IDs of all wheels and write them down to use for
re-registration of transmitter IDs See: Testing and Inspection/Programming and Relearning/Tire Pressure Warning System/Registration.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof
Headlining/Removal
3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof
Headlining/Installation
4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Dashboard / Instrument Panel/Service and Repair/Removal
and Replacement/Instrument Panel Safety Pad (From 03-2006 to 10-2006)/Removal
5. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY See: Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Instrument Panel Safety Pad (From 03-2006 to 10-2006)/Removal
6. REMOVE TIRE PRESSURE WARNING ECU
(a) Remove the nut.
(b) Disconnect the connector and remove the tire pressure warning ECU.
From 10-2006
TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: REMOVAL
REMOVAL
NOTICE: Before removing the tire pressure warning ECU, read the registered transmitter IDs of all wheels and write them down to use for
re-registration of transmitter IDs See: Testing and Inspection/Programming and Relearning/Tire Pressure Warning System/Registration.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof
Headlining/Removal
3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof
Headlining/Removal
4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMC Made) See: Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Instrument Panel Safety Pad (for TMC Made)(From 10-2006)/Removal
5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMMK Made) See: Dashboard / Instrument Panel/Service
and Repair/Removal and Replacement/Instrument Panel Safety Pad (for TMMK Made)(From 10-2006)/Removal
6. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMC Made) See: Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Instrument Panel Safety Pad (for TMC Made)(From 10-2006)/Removal
7. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMMK Made) See: Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Instrument Panel Safety Pad (for TMMK Made)(From 10-2006)/Removal
8. REMOVE TIRE PRESSURE WARNING ECU